Configure Wpa-Psk - D-Link DAP-1562 User Manual

Section 5 - Connecting to a Wireless Network
It is recommended to enable WPA on your wireless bridge or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WPA key being used.
1. Open the Windows® XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower-right corner of
screen). Select View Available Wireless Networks.
2. Highlight the wireless network (SSID) you would like to connect
to and click Connect.
D-Link DAP-1560 User Manual

Configure WPA-PSK

67