Network Settings; Static - D-Link DAP-1562 User Manual

Section 3 - Configuration
This section will allow you to change the local network settings of the bridge and to configure the Static settings.
LAN Connection Use the drop-down menu to select Static IP if you
Type: want to manually assign the IP address, subnet
mask, and gateway addresses. Select Dynamic IP
(DHCP) to automatically receive an IP address from
your DHCP server or router.
Access Point IP Enter the IP address you want to assign the bridge.
Address:
Subnet Mask: Enter the Subnet Mask you want to assign the
bridge.
Gateway Address:
Enter the Gateway you want to assign the bridge.
Device Name: Enter the Device Name of the AP and click Next to
continue. It is recommended to change the Device
Name if there is more than one D-Link device within
the subnet.
D-Link DAP-1560 User Manual

Network Settings

Static

42