Status Windows - Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual

Chapter 3 Configuring and Managing the IP Camera
Table 3-20
Option
Navigation Keys
Focus Far button
Focus Near button
Set Home
Preset List
Preset Name
Pan Speed
Tilt Speed

Status Windows

The Status windows provide options for viewing and managing a variety of system information.
The following sections describe the Applications windows in detail:
•
•
•
•
•
The status windows are not currently supported if you use the IP camera with Cisco VSM.
Note
OL-14220-02
Preset Positions Options (continued)
Description
Set the pan and tilt positions as follows:
•
•
•
Use these buttons to control focus settings for the IP camera.
Click the Set Home button to define the current IP camera position, zoom
setting, and focus setting as its home position.
Choose a name from this list to update this window with information that has
been set for that preset position.
To remove a preset position, choose it from this list and click Remove.
After positioning the IP camera by using the Navigation keys, add this
position as a preset position by entering a name of up 16 characters and
clicking Add.
After you click Save in the Set Pan/Tilt window, this preset name is available
from the Preset List drop-down list in this window and on the Preset list in
the PTZ (RS-485) window.
Select the relative speed for the IP camera panning action. Options range
from 1 (slowest) to 10 (fastest).
Select the relative speed for the IP camera tilting action. Options range from
1 (slowest) to 10 (fastest).
System Window, page 3-36
Audio/Video Window, page 3-36
Network Window, page 3-37
Syslog & Log Window, page 3-38
Video Log Window, page 3-43
To pan the IP camera, use the left or right arrow buttons
To tilt the IP camera, use the up or down arrow buttons
To move the IP camera to its home position, click the Move Camera
Home button, which is located in the middle of the group of arrow keys
Cisco Video Surveillance System IP Camera User Guide
Status Windows
3-35