Administration Windows; Users Window - Cisco CIVS-IPC-2500W - Video Surveillance IP Camera Network User Manual

Chapter 3 Configuring and Managing the IP Camera
If you change any options in the IP Filter window, you must click Save to save the changes. To discard
the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You
may need to scroll down to see them.
Table 3-5
These features are not currently supported if you use the IP camera with Cisco VSM.
Note
Table 3-5
Option
Options
Single/Range

Administration Windows

The Administration windows let you configure IP camera users, reset or restart the IP camera, and
upgrade firmware on the IP camera.
The following sections describe the Setup windows in detail:
•
•
•

Users Window

The Users window lets you configure access to the IP camera for the following types of users:
•
•
OL-14220-02
describes the options in the IP Filter window.
IP Filter Window Options
Description
Choose the option that specifies how to control IP addresses from which the
IP camera can be accessed:
•
•
•
If you enable IP address filtering, choose either of the following options
from as many drop-down lists as needed:
•
•
Users Window, page 3-13.
Maintenance Window, page 3-15
Firmware Window, page 3-16.
Administrator—Can access the configuration windows for the IP camera, view video in the Home
window, and access all controls in the Home window.
User—You can configure up to 20 users and assign privilege levels to each one.
Disable—Do not use the IP address filtering feature. In this case, the IP
camera can be accessed from a device with any IP address.
Enable and deny the following IP address—Lets you designate one or
more IP addresses or range of IP addresses that cannot access the IP
camera. All other IP addresses can access the IP camera.
Enable and allow the following IP address—Lets you designate one
or more IP addresses or range of IP addresses that can access the IP
camera. All other IP addresses cannot access the IP camera.
Single—Enter an IP address that is denied or allowed access to the IP
camera, depending on the Options setting.
Range—Enter a range of IP address that is denied or allowed access to
the IP camera, depending on the Options setting.
Cisco Video Surveillance System IP Camera User Guide
Administration Windows
3-13