Materials And Basic Tools Needed; Materials Needed; Basic Tools - Kenmore 33124 - Power Miser 12 Owner's Manual

Materials and Basic Tools Needed
Materials Needed
To simplify the installation Sears has available the installation
parts shown below. You may or may not need all of these materi-
als, depending on your type of installation.
_f
Electric
Water Heater
Installation
Kit
[1"
o
_b
WATER HEATER HEAT TRAPS
HELP REDUCE HEAT LOSS DUE TO
THERMAL SYPHONING
WATER HEATER INSTALLA.
TION KIT WITH FLEXIBLE
CONNECTORS FOR 314" OR
I/2" THREADED OR COPPER
PLUMBING
,r,,
r
EXPANSION TANKS FOR THERMAL
EXPANSION CONDITIONS AVAILABLE IN
2 GALLON AND $ GALLON CAPACITY
THROUGH LOCAL SEARS SERVICE CENTERS
20" DIAMETER DRAIN PAN
FOR WATER HEATERS 18" IN
DIAMETER AND UNDER
28" DIAMETER DRAIN PAN FOR
WATER HEATERS 26" IN
DIAMETER AND UNDER
Basic Tools
You may or may not need all of these tools, depending on yc o ur
type of installation. These tools can be purchased at your local
Sears store.
• Pipe Wrench (2)
• Screwdriver
• 6 Foot Tape or Folding Rule
• Garden Hose
• Drill
• Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PHILLIPS SCREWDRIVER
!i
WRENCH
PIPE DOPE (SQUEEZE TUBE)
ROLL OF TEFLON TAPE DRILL
(Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
•Tubing Cutters or Hacksaw
•Propane Torch
•Soft Solder
•Solder Flux
•Emery Cloth
•Wire Brushes
BRUSH
1/2" WIRE BRUSH
_'_ PROPANE TORCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY SOLDER TUBING
CLOTH FLUX CUTTER