Tools; Discs - Yamaha CRW4416E - CRW - CD-RW Drive User Manual

Chapter 1 - System Configuration

Tools

Phillips screwdriver
This is used to remove the
cover of your computer,
and to install the Yamaha CRW4416E drive.
Long nose pliers
These are used to insert or remove
the jumper pin when setting the
MASTER/SLAVE settings of the
Yamaha CRW4416E drive.

Discs

CD-R discs
Please use discs that are compliant with Orange Book Part 2.
(If you wish to write data at 4X speed, you must use discs which sup-
port high-speed writing.)
CD-RW discs
Please use discs that are compliant with Orange Book Part 3.
(If you wish to write data at 4X speed, you must use discs which sup-
port 4X speed writing.)
Yamaha recommends the following Yamaha CD-RW discs:
• CRWM74B4X ( 120mm, 74 minutes)
• CRWM74R4X ( 120mm, 74 minutes)
Read-only Discs
You can use discs with the
Disc Read Only Memory standard (CD-ROM standard, Yellow Book).
If you wish to use the audio functions, use discs with the
which conform to the Compact Disc Digital Audio standard (Red Book).
4
Phillips Screwdriver
Long nose pliers
logo which conform to the Compact
logo,