External Switch Control (See Chapter 9); External Power Control - Pioneer DVD-V7200 Network Manual

2.3.2 External Switch Control (see Chapter 9)

Control the player with the External Option Switches (SW#).
Please make sure the Key Lock condition. If the player is in the Key
Lock mode, the player ignores the control. (Please refer to the Key
Lock command description.)

2.3.3 External Power Control

Control the player's power with the Power pin within the Interface
Connector.
If the player detects a high signal throughput (100m/sec or more)
during the Standby mode, the player powers on. If the player detects
the same signal during the Power On mode, the player powers off
and switches to the Standby mode.
The specifications for the Power pin are as follows:
Maximum Input Voltage
High Level Signal
Low Level Signal
Standby mode
Power On mode
Please verify that the Key Lock condition is deactivated. If the player
is in the Key Lock mode, the player ignores the control. (Please refer
to the Key Lock command description.)
DVD-V7200 Upload/Download
m
Less Than
More Than 4.5V
Less Than 0.5V
more than
100 msec
more than
100 msec
- 3 -
12V
Power On
Power Off