Ibm Surepos 500 4840; Ibm Surepos 500 4846-5Xx; Ibm Surepos 500 4851/4951-514; Ibm Surepos 700 4800-7X1 - IBM 4800-C41 Configuration Manual

Identifier "Screen[1]"
Monitor "Monitor[1]"
[...]
EndSection

IBM SurePOS 500 4840

To fully configure SLED 11 to run on an IBM SurePOS 500 4840:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Launch the terminal application from Init 3 text console mode.
3. Perform the procedures in "FBdev driver configuration" on page 6.
4. Perform the procedures in "Serial touch screen calibration" on page 3.
5. (PS/2 mouse only) Connect the PS/2 mouse to a Y splitter before you connect it to the PS/2 port on the
system.

IBM SurePOS 500 4846-5xx

To fully configure SLED 11 to run on an IBM SurePOS 500 4846-5xx:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Ensure that you are only using 24-bit default color depth for the integrated monitor.
3. Perform the procedures in "Serial touch screen calibration" on page 3.

IBM SurePOS 500 4851/4951-514

To fully configure SLED 11 to run on an IBM SurePOS 700 4851/4951-514:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Launch the terminal application from Init 3 text console mode and use a text editor to add the bold
line below to the indicated section in the /etc/X11/xorg.conf file:
Section "Device"
[...]
Option "ForcePanel" "True"
[...]
3. Perform the procedures in "Serial touch screen calibration" on page 3.

IBM SurePOS 700 4800-7x1

To fully configure SLED 11 to run on an IBM SurePOS 700 4800-7x1:
1. Install SLED 11 according to the documentation at http://www.novell.com/documentation/sled11/
index.html.
2. Launch the terminal application from Init 3 text console mode.
3. (4800-781/741 only) Configure the display:
®
a. To use the Intel
1) Open the /etc/X11/xorg.conf file in a text editor and modify the "Device" section to add (or
change) the following lines:
Section "Device"
Driver "intel"
Identifier "Device[0]"
Screen 0
video driver:
Chapter 2. SUSE Linux Enterprise Desktop 11 procedures
13