About Dualview Mode
In the default configuration, the SDI output is a clone of the display output. The NVIDIA
Quadro SDI graphics cards also supports Dualview mode, where the desktop extends
across two monitors.
Under Dualview mode, you can define one large desktop that extends from the display
to the SDI output. This lets you move windows between the SDI output and the graphics
(DVI) display part of the extended desktop.
With applications that use video overlay or Microsoft VMR, you can also display the
video full‐screen on the SDI output.
Area displayed on primary display
Extended Desktop with Dualview Mode
Figure 0.1
The display and the SDI output do not need to be the same resolution and refresh rate.
Quadro 4000/5000/6000 SDI
Chapter 03 : Windows–Using the Graphics to SDI Control Panel
Use Full‐Screen Video Mirror to present
a video overlay or Microsoft VMR video
full screen on the SDI output.
Application windows can be dragged
from one display to the other.
Area displayed on the SDI output
DU-05337-001_v01
|
23