Installing the NVIDIA Quadro SDI
Step 1: Install the NVIDIA Quadro SDI
1
Power down the system and open the chassis cover.
2
Install the NVIDIA Quadro card
a
Insert the graphics card into the x16 PCI‐express slot and use a screw to secure the
card's bracket to the system chassis.
b
Connect the power cable to the auxiliary power connector(s).
The NVIDIA Quadro 6000 requires power to two auxiliary power connections.
3
Install the NVIDIA SDI Output card.
a
Insert the NVIDIA SDI Output card into any available type of expansion slot within
six inches of the NVIDIA Quadro G‐Sync connector, and use a screw to secure the
card's bracket to the system chassis.
b
Connect the power cable to the auxiliary power connector.
4
Connect one end of the 14‐pin ribbon cable to the G‐Sync connector on the NVIDIA
Quadro card, and the other end to the NVIDIA SDI Output card.
NVIDIA SDI Output card
5
Close the chassis cover.
Quadro 4000/5000/6000 SDI
Chapter 02 : NVIDIA Graphics-to-SDI
NVIDIA Quadro card
DU-05337-001_v01
|
6