Connect Your Camera To A Computer - Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual

Connect your camera to a computer

1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
h The USB Connection Screen appears on the camera's monitor.
To the USB/AV terminal
on the camera
2 Select "PC CAMERA", and press the SET button.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
HINT
If the [USB Video Device] icon does not appear in the [My Computer]
window...
i The device driver installation may not have been successful. Open the
[Printer and Other Hardware] folder in [Control Panel], delete [USB Video
Device] from [Scanners and Cameras], and reinstall the device driver.
USB/AV terminal
Supplied dedicated
USB interface cable
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
To USB connector on the computer
22
English