Setting To The Card Reader Mode - Sanyo VPC CA6 - Xacti Camcorder - 6.0 MP Instruction Manual

Setting to the card reader mode

1 Start your computer, and use the supplied USB interface cable to
connect your camera to the computer.
h Connect the camera's USB/AV terminal to the computer's USB
connector.
h The USB Connection Screen appears on the camera's monitor.
To the USB/AV terminal
on the camera
2 Select "CARD READER", and press the SET button.
CAUTION
Insert and pull out the cable carefully
i When connecting the cables, make sure that the cable plugs are correctly
oriented and that they match the shapes of the terminal sockets on the
devices. Push the plugs in straight when connecting them. If undue force is
used to connect a cable, it may permanently damage the connector pins in
the terminal socket.
i Do not use excessive force when connecting and disconnecting cables.
i Please connect the dedicated USB interface cable to your computer's USB
connector. Do not connect it to the USB port on your monitor or keyboard,
or to the USB hub. Be especially careful when installing the driver
software. In some instances, it may not be possible to correctly install the
driver software.
USB/AV terminal
Supplied dedicated
USB interface cable
USB CONNECTION
CARD READER
PictBridge
PC CAMERA
CANCEL
To USB connector on the computer
10
English