Sony SLV-M91HF - Video Cassette Recorder Setup Instructions page 37

Hookup and setup instructions
Hide thumbs Also See for SLV-M91HF - Video Cassette Recorder:
Table of Contents

Advertisement

2
Move the cursor stick </, to select
• CURSOR
AUTO, then push the cursor stick (OK).
PUSH OK
3
• CURSOR
Move the cursor stick </, to select YES, then push the cursor
stick (OK).
PUSH OK
4
To activate the Auto Clock Set feature, turn off the VCR.
The VCR automatically sets the clock by searching for a channel that
carries a time signal and sets your time zone and Daylight Saving
Time (if applicable).
If your clock is set to the wrong time zone or Daylight Saving Time,
you can adjust these settings without turning off the Auto Clock Set
feature (page 38).
Notes
• The clock cannot be set automatically if you don't receive a channel that carries a
time signal in your area. If so, set the clock manually.
• If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 30 minutes. If nothing happens even after you
wait about 30 minutes, set the clock manually.
• If you use Hookup 1 or 4, make sure you leave the cable box on.
AUTO CLOCK SET
FULL AUTO
YES NO
Use
t o s e l e c t
Pu s h MENU t o q u i t
continued
37

Advertisement

Table of Contents
loading

Table of Contents