Sony SLV-M91HF - Video Cassette Recorder Setup Instructions page 19

Hookup 3
Antenna hookup
Make the following connections if you're using an antenna (if you don't
have cable TV).
A Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
VHF/UHF
IN
B Use this hookup if you're using a VHF-only antenna (you get
channels 2–13 only)
VCR
VHF/UHF
IN
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the VHF/UHF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
U/V band mixer (not supplied). For details, see page 59.
OUT
OUT
Rear of TV
VHF/UHF
A
Match the type of
connector on your
or
TV: A, B, or C.
VHF
B
UHF
or
VHF
C
UHF
Rear of TV
VHF/UHF
Match the type of
A
connector on your
or
TV: A, B, or C.
VHF
B For connector types
B and C, no UHF
UHF
connection is
or
required.
VHF
C
UHF
Pages 19 to 22
continued
19