Setting The Clock - Magnavox MC09D5MG - 9" Tv/vcr Combination Owner's Manual

MC09D5MG 4/12/02 12:20 PM

12 Setting the Clock

Set the clock accurately for proper timer recording. If a
Public Broadcasting Station (PBS) is available in your area,
follow Auto Clock Setting below. If not, follow Manual
Clock Setting on pages 14-15.
Auto Clock Setting
You can have the TV/VCR set the clock automatically by
using the PBS channel in your area. Once you have set the
clock, the TV/VCR will automatically monitor the correct
time and date being broadcast by the PBS station.
Before you begin, make sure ...
The TV/VCR power is on.
The antenna/Cable TV connections are correct.
The Cable Box is on (if applicable). (See Helpful Hints.)
Channels are set. Details are on pages eight and 10.
1
Press MENU. Press PLAY/
select SETTING CLOCK, then press
F.FWD/B.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
B SETTING CLOCK
CHANNEL SET UP
USER'S SET UP
LANGUAGE [ENGLISH]
ZERO RETURN
TIME SEARCH
2
With AUTO CLOCK selected, press
F.FWD/B or REW/s repeatedly until [ON]
appears beside AUTO CLOCK.
– SETTING CLOCK –
B AUTO CLOCK
AUTO CLOCK CH [AUTO]
MANUAL CLOCK SET
D.S.T.
Page 12
or STOP/
[ON]
[OFF]
1-2
1
to
Helpful Hints
• If the TV/VCR is connected
directly to a Cable Box or
Satellite Box, select the local PBS
station on the Cable Box. Set the
TV/VCR to the output channel of
the Cable Box or Satellite Box
(usually channel 3 or 4), to set
the clock automatically.
• The TV/VCR cannot control or
change the channels of the
Cable Box or Satellite Box.
• If you use the mobile connec-
tions described on page seven,
you cannot use the AUTO
CLOCK function.
POWER SLEEP/WAKE UP
PLAY
REW F.FWD
STOP
DISPLAY
1 2 3
CH.
4 5 6
7 8 9
0 + 100
VOL.
SPEED RESET PAUSE/STILL
RECORD TIME SEARCH MUTE