Motorola T250 User Manual page 19

Connect the USB cable
PC and connect the other end to your base unit.
Setting up the Ice software
If you want Ice to work with Skype when your original selection was
have a problem with your Skype permission you should reset the
permission as follows:
On Skype PC window:
Tools > Options > Advanced > Manage other
program's access to Skype
click
Change
Allow this program to use Skype
OK again to exit the window and
settings and exit Tools.
If you are using a USB hub and you receive an alert message "Ice not
available please check PC", then try plugging the USB directly in to your PC.
To prevent delays it is recommended that you set Skype to memorise
launch and sign into Skype automatically.
If you choose the computer not to remember your password then
when you run Ice it will bring up Skype window for you to sign in.
The Ice icon in the system tray will flash for a few seconds then
remain on.
20
Motorola D850 User guide
and select .
OK
Save to save the new
Setting up the Ice software