Notice To Parents - VTech 80-102100 - Light-Up Learning Phone User Manual

4. Replace the battery cover and tighten the screw to secure the
battery cover.
BATTERY INSTALLATION FOR HANDSET
1. Locate the battery cover on the top of the
handset.
2. Use a small cross-head screwdriver to loosen
the battery cover.
3. Install a new "CR2032" size battery as illustrated.
4. Close the battery cover and tighten the screw to secure.
Note: All recorded messages will be erased once the battery is
replaced.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline,
standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Remove the batteries from the equipment when the unit will not
be used for an extended period of time.
• Always remove exhausted batteries from the equipment.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended
are to be used.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.

NOTICE TO PARENTS

The demo connecting tag should be removed automatically when
the product is taken out of the packaging. If the demo tag is still in
position when you begin play, please remove it from the unit to activate
normal play mode.
4