Craftsman 21828 - Professional 10 in. Jobsite Saw Operator's Manual page 16

TO STORE THE TABLE SAW ACCESSORIES
See Figures 7- 8.
The table saw has two convenient storage areas (one on
either side of the saw cabinet) specifically designed for
the saw's accessories.
When not in use, store accessories securely.
RAISING AND LOWERING THE TELESCOPING
HANDLE
See Figure 9.
[] To raise the handle, grasp the button while pulling the
handle up.
NOTE: The handle will "click" as it locks in place.
[] To lower the handle, press the button while pushing the
handle down into the handle tube.
TELESCOPING
HANDLE
BUTTON
BLADE
WRENCHES
Fig. 7
Fig. 9
TO MOVE THE SAW
See Figure 10.
[] Holding the telescoping handle firmly, tilt the saw
toward you until the saw is balanced on the wheels.
[] Pull the saw to the desired location then either mount
to a firm supporting surface such as a workbench or
leg stand for immediate saw operation or store the saw
in a dry environment.
PUSH STICK
MITER
GAUGE
Fig. 8
16
1
J
Fig. 10