Loose Parts - Ryobi BD4600 Operator's Manual

The following items are included with the tool:
 Sanding Disc
 Disc Guard
 Phillips Screws ()
 Socket Head Screws, M8 x 1 ()
 Washers ()
Miter GAuGe
WorK
SuPPort
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-55-579 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to heed this
warning could result in serious personal injury.

LOOSE PARTS

SAndinG diSC
SoCKet HeAd
SCreWS
ASSEMBLy
 Miter Gauge
 Hex Key
 Worktable
 Work Support
 Operator's Manual (not shown)
diSC GuArd
WASHerS
WARNING:
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
WARNING:
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
11
PHilliPS
SCreWS
WorKtABle
HeX KeY
Fig. 5