Statistical Graphs - Casio CFX9850GBPLUS User Manual

9-6 Statistical Graphs

This section explains how to graph the data in a spreadsheet.
k Overview
Except for selection of the data to be graphed, the graph operations you can use in the
S SHT mode are basically the same as those in the STAT mode. This section explains
•
the differences between the S
functions.
k Using the Graph Menu
Press 6 (g )1 (GRPH) to display the GRPH submenu.
The functions on the GRPH submenu are the same as those that appear when you press
1 (GRPH) in the STAT mode List Editor. The following explains each function and where
you need to go to fi nd out more for them.
Key
1 (GPH1)
2 (GPH2)
3 (GPH3)
4 (SEL)
6 (SET)
The functions of function menu keys 1 through 4 are basically the same as the STAT
mode function menu. Some of the functions on the menu that appears when you press
6 (SET) here are different from those that appear when you press 6 (SET) in the STAT
mode. For details about the differences, see "Confi guring Graph Parameter Settings" on
page 9-6-2.
Statistical Graphs
SHT mode graph functions and the STAT mode graph
•
Description
Draws a graph in accordance with
StatGraph1 settings (see 6 (SET) below).
Draws a graph in accordance with
StatGraph2 settings (see 6 (SET) below).
Draws a graph in accordance with
StatGraph3 settings (see 6 (SET) below).
Displays a screen for selecting the graph
parameter setup (StatGraph1, StatGraph2,
or StatGraph3). You can also use the screen
to specify simultaneous drawing of multiple
graphs.
Displays a screen for confi guring graph
parameter settings (data to be graphed,
graph type, etc.) The setting screen lets you
confi gure separate settings for StatGraph1,
StatGraph2, and StatGraph3.
9-6-1
20070201
Go here for more details:
"Changing Graph
Parameters" (page 6-1-2)
"2. Graph draw/non-draw
status" (page 6-1-4)
"1. General graph settings"
(page 6-1-2)
"Confi guring Graph
Parameter Settings" (page
9-6-2)