Basic Tv And Remote Control Operations - Magnavox 20MS233S - 20" Color Tv Stereo Owner's Manual

Television
1
Press POWER to turn on the TV.
2
Press VOLUME + to increase the
sound level. Press VOLUME – to lower
the sound level.
Press both buttons at the same
time to display the TV's on-screen
menu. Once in the menu, use these but-
tons to make menu adjustments or
selections.
3
Press CHANNEL ; 8 or 9 to select
TV channels.
Remote Control
4
Point the remote control toward the
remote sensor on the front of the TV
when operating the TV.
Battery Installation
T
o load the supplied batteries into the remote:
1. Remove the battery compartment
lid on the back of the remote.
2. Place the batteries (two AA) in the
remote. Be sure the (+) and (-) ends of
the batteries line up correctly (as
marked inside the remote).
3. Reattach the battery lid.
Helpful Hints
The current channel num-
ber will appear briefly when
you first turn on the TV or
when you change channels.
Press STATUS/EXIT to see
the current channel number.

Basic TV and Remote Control Operations

Connect head-
phones (not
supplied) to
the ; jack.
Non-Stereo
models (white
AUDIO IN jack)
Stereo models
(red and white
AUDIO IN jacks)
Battery Installation
8
Connect a VCR, DVD
Player, Camcorder, etc.
to the AUDIO/VIDEO
IN jacks. See page 7.
Remote sensor on
remote control
Remote Sensors
(point the
remote here)