Advertisement
REW
Press this button to reverse the tape rapidly. Press
REW, RCL
VA
or STOP to return to playing speed. If
you press RCL
V A ,
the tape will also change sides.
NXT Press this button to go forward to the beginning
of
the next selection. Press NXT again or press RCL
VA
or STOP to cancel this function. If you press RCL
VA
,
the tape will also change sides.
PRV: Press this button to go back to the beginning of
the last selection. Press the button again or press
RCL
VA
or STOP to cancel this function.
For NXT and PRV to work properly, your tape must
have at least three or four seconds of silence between
each selection. If you press RCL
V A
, the tape will also
change sides.
RPT Press this button to go to the beginning of the
selection and play it again. Press RPT again to cancel
this function.
NOISE REDUCTION: Press
OO@
to remove noise
from Dolby' B NR-encoded tapes.
Dolby@ B Noise Reduction is manufactured under
license from Dolby Laboratories Licensing Corporation.
Dolby' and the
00'
symbol are trademarks of Dolby
Laboratories Licensing Corporation.
RDM:
When playing a tape, press this button during
FF or REW to hear the radio. Press it again to turn the
radio off. During this operation, only TUNE, SEEK and
PSCAN will work.
TAPE SIDES: Press RCL
VA
to switch from one side
of the tape to the other.
STOP: Press this button to stop the tape and switch to
radio.
EJECT Press this button to remove the taoe and switch
to radio.
Cln: This message may appear on the display. If it does,
your cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to your tapes and player. See "Care of
Your Cassette Tape Player" in the Index. After you clean
the player, press and hold EJECT for five seconds to
reset the Cln indicator.
"---"
will appear in the display to
show the indicator was reset.
3-14
Advertisement
