Geo PRIZM 1993 Manual page 81

3. Push the lever down to SET/COAST
and release it. (The CRUISE light on
the instrument panel will come on.)
4. Take your foot off the accelerator
pedal.
To Resume a Set Speed
Suppose you set your Cruise Control at
a desired speed and then you apply the
brake. This, of course, shuts off the
Cruise Control.
But
you don't need to
reset it. Unless you're going about 25
mph ( 4 0 km/h) or less or you slowed
down to 10 mph (16 km/h) less than
your preset speed, you can press the
lever up to RES/ACC for about half a
second.
You'll go right back up to your chosen
speed and stay there.
If your preset speed cancels out when
it
shouldn't, there may be a problem with
your Cruise Control. See your dealer.
I
A
If you hold the switch at
RES/ACC longer than
half
a
second, the vehicle will keep going
faster until you release the lever or
apply the brake. You could be
startled
and even lose control. So
unless
you
want to
go
faster, don't
hold the lever at RES/ACC.