Voice Recognition - Chevrolet EQUINOX - 2011 Owner's Manual

To start a conference while in a
current call:
1. Press the MENU/SELECT knob.
2. Select Enter Number.
3. Enter the character sequence
then select Call. See Entering a
Character Sequence in
information.
4. After the call has been placed,
press the MENU/SELECT knob
and choose Merge Calls.
5. To add more callers to the
conference call, repeat Steps 1
through 4. The number of callers
that can be added are limited by
your wireless service carrier.
Ending a Call
Press the MENU/SELECT knob and
select Hang Up.
Muting a Call
To Mute a Call
Press the MENU/SELECT knob and
select Mute Call.
To Cancel Mute
Press the MENU/SELECT knob and
select Mute Call.
for more
Dual Tone Multi-Frequency
(DTMF) Tones
The in vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu driven
phone system.
1. Press the MENU/SELECT knob
and select Enter Number.
2. Enter the character sequence.
See Entering a Character
Sequence in
for more information.
Infotainment System
Bluetooth

(Voice Recognition)

Pairing
A Bluetooth cell phone must be
paired to the Bluetooth system and
then connected to the vehicle before
it can be used. See the cell phone
manufacturer's user guide for
Bluetooth functions before pairing
the cell phone. If a Bluetooth phone
is not connected, calls will be made
®
using OnStar Hands Free Calling,
if available. Refer to the OnStar
owner's guide for more information.
The pairing process can be started
by using the voice recognition
system or the controls on the
infotainment system.
7-51