ZyXEL Communications ZyWall 35 Support Notes page 56

Key Settings:
Class Name Give this class a name, for example, 'App'
Bandwidth
Configure the speed you would like to allocate to this class
Budget
Enter a number between 0 and 7 to set the priority of this class. The higher the number,
Priority
the higher the priority. The default setting is 3.
Check this box if you would like to let this class to borrow bandwidth from it's parents
when the required bandwidth is higher than the configured amount. Do not check this if
Bandwidth
you want to limit the bandwidth of this class at the configured value.(Please note that
Borrowing
you should also disable Maximize Bandwidth Usage on the interface to meat the
condition.)
Enable
Bandwidth Check this to specify the traffic types via IP addresses/Port numbers.
Filter
Destination IP
Enter the IP address of destination that meats this class.
Address
Destination
Enter the destination subnet mask.
Subnet Mask
Destination
Enter the destination port number of the traffic.
Port
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 35 Support Notes
56