Zyxel Vpn Client To Zywall Tunneling - ZyXEL Communications ZyWall 35 Support Notes

When external "RADIUS" is selected, please input the Service IP address of the external RADIUS server
and the shared Key which must be configured on the RADIUS. The default (UDP) port number for
RADIUS is 1812. If RADIUS server uses a different port number, please configure it correctly.

ZyXEL VPN Client to ZyWALL Tunneling

1. Setup ZyWALL VPN Client
2. Setup ZyWALL
This page guides us to setup a VPN connection between the VPN software and ZyWALL router. There will be
several devices we need to setup for this case. They are VPN software and ZyWALL router.
As the figure shown below, the tunnel between PC 2 and ZyWALL ensures the packets flow between them is
secure. Because the packets go through the IPSec tunnel are encrypted. To setup this VPN tunnel, the required
settings for the software and ZyWALL are explained in the following sections.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 35 Support Notes
230