Table of Contents
Advertisement
Dial Plan Parameters
Recommended Values:
•
•
Voice Configuration Menu Access Code
929
Dial Plan Parameters
This section describes the configurable parameters related to dial plans:
•
•
•
DialPlan
Description
The programmable dial plan is designed for the service provider to customize the behavior of the
Cisco ATA for collecting and sending dialed digits. The dial plan allows the Cisco ATA user to specify
the events that trigger the sending of dialed digits. These events include the following:
•
•
•
•
Value Type
Alphanumeric string
Range
Maximum number of characters is 199.
If the dial plan exceeds 199 characters, use the DialPlanEx parameter instead of the DialPlan parameter.
Note
For more information, see the
Default
*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
Voice Configuration Menu Access Code
926
Additional DialPlan Information
The DialPlan section contains the following additional topics that describe commands and rules for
creating your own dial plan, and includes many examples:
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
5-52
United States —2,4,25
Sweden — 1,5,25
DialPlan, page 5-52
DialPlanEx, page 5-60
IPDialPlan, page 5-60
The termination character has been entered.
The specified dial string pattern has been accumulated.
The specified number of dialed digits has been accumulated.
The specified inter-digit timer has expired.
"DialPlanEx" section on page
Chapter 5
Parameters and Defaults
5-60.
OL-4804-01
Advertisement
Table of Contents
