Additional Options-Place A Call; Answer A Call - Cisco 7975G - Unified IP Phone VoIP User Manual

• Dial the number, and then press the Headset button.
• If you have selected a number from a directory, press the Dial soft key.
• Press Redial to dial the last number, or press the Navigation button (with the phone idle) to see your Placed Calls.
• If you are placing a call while another call is active (using the same line), press Hold, and then press New Call and enter the
number?
• If you are dialing from the directory, choose
touch screen.
• If you are dialing on-hook, without a dial tone (predial), enter a number, then go off-hook by lifting the handset, pressing
the number on the touch screen, or pressing Dial,
• When you predial, your phone tries to anticipate the number you are dialing by displaying matching numbers (if available)
from your Placed Calls log. This is called Auto Dial. To call a number displayed with Auto Dial, press the number, or scroll
to it and go off-hook.
Use the backspace (<<) soft key to erase digits that you enter incorrectly.
Note
Additional Options—Place a Call
To place a call while another call is active (using a different line):
1. Press for a new line. The first call is automatically placed on hold.
2. Enter a number.
To dial from a Personal Address Book (PAB) entry:
1. Press > Personal Directory to log in.
2. Choose Personal Address Book and search for a listing.

Answer a Call

Use one of the following methods to answer a call:
• Press to answer with a headset, if unlit. Or, if
• Press , to answer with the speakerphone, press Answer, or
• Press Answer to switch from a connected call to answer a new call, or, if the call is ringing on a different line, press
(flashing).
• Press Answer to answer a call using call waiting.
• Press iDivert to send a call to your voice messaging system.
End a Call
Use one of the following methods to end a call:
• Hang up the handset or press EndCall.
• If you are using a headset, press
• If you are using the speakerphone, press
• Press EndCall to hang up one call, and preserve another call on the same line. If necessary, remove the call from hold first.
Hold and Resume a Call
Engaging the Hold feature typically generates music or a beep. A call-on-hold is indicated by the
To put a call on hold:
1. Make sure the call you want to put on hold is highlighted.
2. Press Hold.
Missed Calls, Received Calls, or Placed Calls. Press the listings on the
, or
is lit, press Answer or
. Or, to keep headset mode active, press EndCall.
or EndCall.
.
(flashing).
(flashing).
icon.
9