Introducing the Cisco IP Conference Station 7935
Configuring Startup Network Settings
Introducing the Cisco IP Conference Station 7935
Cisco IP Conference Station 7935 Administration Guide
2-14
If you are not using DHCP in your network, you must configure the following
network settings on the IP Conference Station after installing the station on the
network:
IP address
•
•
IP subnet mask
•
Default gateway IP address
TFTP server IP address
•
Collect the necessary information and follow the procedures described in
Chapter 3, "Configuration of the Cisco IP Conference Station
The IP Conference Station provides basic business audio conferencing features
and functions, such as Call Hold, Call Transfer, Call Release, Mute, and
Conference, over an IP network. It is designed to be used primarily on desktops
and in small- to medium-sized conference rooms to facilitate conference calling.
It replaces a traditional analog conferencing unit on an IP telephony network. The
IP Conference Station supports G.711 and G.729a audio compression.
The IP Conference Station is shown in the following picture.
Chapter 2
Installation of the Cisco IP Conference Station 7935
7935".
78-12727-03