Accessing Voice Messages - Cisco 7911G - IP Phone VoIP Phone Manual

Accessing Voice Messages

To access voice messages, press
Note Your company determines the voice message service that your phone system uses. For the most
accurate and detailed information, refer to the documentation that came with your voice
message service.
If you want to...
Set up and
personalize your
voice message
service
Check for a new
voice message
Listen to your voice
messages or access
the voice messages
menu
Send a call to a
voice message
system
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 7.0
, and select Messages.
Then...
Do one of the following:
• Press Msgs and follow the voice instructions.
• Press , select Messages, and follow the voice instructions.
Look for:
• A steady red light on your handset. (This indicator can vary. See
Customizing Rings and Message Indicators, page
• A flashing message waiting icon
Listen for:
• A stutter tone from your handset, headset, or speakerphone when you place
a call.
Do one of the following:
• Press Msgs and follow the voice instructions.
• Press , select Messages, and follow the voice instructions.
Press Divert. For more information, see
System, page 21.
Accessing Voice Messages
43.)
on your phone screen.
Sending a Call to a Voice Message
51