Ending A Call; Using The Speaker - Cisco 7905G - IP Phone VoIP Phone Manual

If you want to...
Use your phone to answer a call
that is ringing on another phone
Send an incoming call directly to
the voice messaging system.

Ending a Call

To end a call, hang up the handset or press EndCall.
If you press End Call, you do not have to put the handset back in the cradle to end the call.
Note
When the handset in not in the cradle, the off-hook icon will appear on the screen although
there are no active calls.

Using the Speaker

The Cisco Unified IP Phone 7905G and 7912G each provide a speaker for hands-free listening. You
can use the speaker only to listen to a call. To talk on a call, you must pick up the handset.
If you want to...
Listen to the other party on the
speaker
Listen to the other party using the
handset
Turn off the speaker and hang up
Adjust the volume on the speaker
If you system administrator has disabled the speaker on your phone, the Monitor and MonOff
Tip
softkeys will not be available to you. You must lift the handset to place and monitor calls.
24
Then...
Use Call Pickup. See the "Understanding Shared Lines" section on
page 33.
Press iDivert. The incoming call automatically transfers to your
voice message greeting.
Then...
Press Monitor and then hang up the handset. You will be able to
hear the call but you will not be able to talk on the call.
Lift the handset or press MonOff.
Press EndCall.
Press the up or down Volume button when the speaker is in use.
If you want to save the speaker volume setting, press Save.
OL-8166-01