Connect Hardware - Belkin F1DU120 - Pulse Network Monitor Quick Installation Manual

Web-Console Instructions
Step 1

Connect hardware

Note: Refer to this section for static IP configurations or if you have
trouble getting Pulse to connect.
Attach the red crossover cable to the USB adapter, and attach the other end
of the cable to your computer. Next, plug the USB adapter into one of the USB
jacks on the back of Pulse. Your computer's network settings should be set to
DHCP.
Connect Hardware | 7
5340ea_F1DUXXXea_QIG.indb 12 29/11/06 1:57:56 pm