Table of Contents
Advertisement
Troubleshooting
Check
Is the battery dead?
point 1
No display
on the LCD.
Are the battery
Check
point 2
poles positioned
correctly?
Check
Are the recording
point 1
Recording is
numbers all used up or is
recording memory full?
disabled.
Check
Is the battery dead?
point 2
Check
Is the product in
point 1
Playing is
Hold mode?
disabled.
Is there anything
Check
point 2
to record?
Check
Is the battery dead?
point 3
Is a MP3 file saved
Check
in a voice folder or a
point 4
voice file saved in a
MP3 folder?
Check
Is the volume set to '0'?
No sound is
point 1
heard from
the speaker.
Are the earphones
Check
point 2
plugged-in to the
product?
44
Replace the battery.
Insert the battery with
its poles in the correct
position.
Delete
unnecessary files.
Replace the
battery.
Release the Hold
switch.
Check the recording
number.
Replace the battery.
Save the file in the
correct folder.
Adjust the volume.
Unplug the
earphones.
Check
Is the volume set to '0'?
No sound is
point 1
heard from the
earphones.
Are the earphones
Check
point 2
correctly plugged-in
to the product?
Is the backlight
Check
point 1
illuminated on the LCD?
None of the
buttons work.
All saved files will be deleted
and the product will be initialized
when the Play/Pause button is
pressed and held while holding the
Folder button with the Voice yepp
power off. Do not repeat this action
in vain as it may cause a break down.
Check
Have you connected
Cannot
point 1
the USB cable in the
connect the
correct way?
unit to a PC.
Formatting (You will lose all data in the Voice yepp.)
Re-Format the Voice yepp if the defect was caused by an
external impact.
Turn the power off of Voice yepp. Press and hold the
Play/Pause button while holding the Folder button.
Your Voice yepp is now initialized.
Adjust the volume.
Plug-in the
earphones
correctly.
Remove and re-
insert the battery.
Disconnect the
USB cable and
re-connect. If the
problem persists,
re-boot the PC.
45
Advertisement
Table of Contents
