External Sources - Skoda CAR RADIO AUDIENCE - FOR OCTAVIA Manual

Table of Contents

Advertisement

12
The CD changer
TRACK - Play function of titles in random order in a certain folder;
FOLDER - is a CD inserted with MP3 data, the titles in random order are played
from randomly selected folders.
PLAY
CD - play function of standard audio data in the format CD-DA;
MP3 - play function of data in the MP3 format.
REPEAT
Selection of the mode for repeating the title.
OFF - Play function in continuous order;
TRACK - repeated play function of the selected title;
FOLDER - is a CD inserted with MP3 data, the titles are repeated from the folder,
which was active when starting the repeat mode.
NEXT CD
AUTO - automatic selection of the next CD;
MAN - the selected CD is repeatedly played.
Information on how to use a CD
CD to jump
Uneven road surfaces and strong vibrations may cause the CD to jump.
Formation of condensation
When it is cold and after rain showers, moisture can deposit in the CD drive
(condensation). This can effect the CD jump or impair the play function. In such
cases wait until the moisture has dissipated.
Notes for the care of the CDs
If a CD is soiled, please never clean the CD in the direction of a circle but rather with
a soft fluffly cloth from inside to outside. In case of severe layers of dirt we recom-
mend to clean the CD with a commercially available CD cleaner. Also in this case do
not clean the CD in the direction of a circle but rather from inside to outside and
then let it dry off.
Caution
Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise the
surface of the CD could get damaged.
Never expose CDs to direct sun rays!
Please never write or affix the CD!
Note
Dirt or damage of a CD can lead to difficulties when "reading" the information. The
difficulty in reading the error depends on the dirt or on the severity of the mechan-
ical damage. Severe scratches cause reading errors which can make the CD jump or
"get stuck". All CDs must be treated carefully and always be stored in a protective
case.

External sources

Your radio enables the connection of audio units from a wide range, e.g.
portable player.
Activating an external audio source
– By repetitively pressing the button
AUX IN... is displayed. The play function starts automatically after
connecting the external source.
– If you wish to set the input sensitivity depending on the signal output
level of the external source, press the station key
End play function of the external source
– Press button
or
. It starts the play function of the last selected
FM
AM
radio station.
– Press the button
CD
, in order to start the play function of the CD.
activate the external input,
CD
A
.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Car radio audience

Table of Contents