Skoda CAR RADIO AUDIENCE - FOR OCTAVIA Manual page 10

8 Radio
•
If the selected radio station does not transmit any radio text, the message TEXT
UNAVAILABLE appears.
Traffic reports
Activating and deactivating the traffic information
Press the button , TP appears in the display. If a set radio station does not
TP
transmit a traffic report, the radio searches for a station which transmits the traffic
report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO INFO is shown on
the display.
An incoming traffic report automatically interrupts the CD play function or listening
to a radio station, which at that moment is not transmitting a traffic report. TRAFFIC
is displayed on the display. At the end of the traffic report, the radio automatically
returns to the original play function.
If you wish to deactivate the traffic information, press once again the button
goes out on the display.
Play function of traffic reports
Press the button AIM .
A
After pressing the station key PLAY the last stored traffic report is replayed. After
12
its play function, the previously stored traffic reports are automatically replayed.
The recording time, the relevant station name and the number of stored traffic
reports are shown on the display.
You can select between the individual traffic reports using the station keys
 .
Deleting traffic reports
The memory for the recording of the traffic reports can take up to 9 reports or up to
4 minutes. Old traffic reports are automatically replaced by new ones.
In order to delete individual traffic reports, press the button
A
station key DEL.
12
In order to delete all the traffic reports, press the station key
Recording traffic reports
Your radio enables you to set 2 time segments, during which the traffic reports can
be stored.
Press the button
Press the station key
Set the desired time segments by turning the rotary/push knob
Note
•
The information emitted by a radio station can be received while listening to
another radio station. If no reception of traffic reports is possible, NO INFO appears
on the display.
•
If you wish to receive no traffic reports, press the station key
Function SCAN
, TP
TP
Stations of a waveband can be played briefly one after the other (for ten
seconds).
– Press the button
stations of the current waveband.
– If you wish to select other radio stations, press the button
– End the automatic finding by pressing the button
radio station remains selected.
A 
or
12
– In order to call up the original radio station, press the station key
CANCEL.
Program types (PTY)
and then the
AIM
This function enables a finding of radio stations with the desired program
type.
A
DEL ALL.
12
, AIM RECORDING is displayed in the display.
AIM
A
SETUP. There are 2 time segments displayed in the display.
12
, the radio searches automatically all available
SCAN
A
.
1
A
AIM OFF.
12
A
 
or .
12
A
OK. The current
12
A
12