Table of Contents
Advertisement
2. Specification
Orientation
2.2.9.
The SDX-470V can be installed in three different mounting positions as shown in the figure below. Each position has
a maximum tolerance of ± 10 degrees.
10 10
2.3. Performance Specification
The data capacity, data transfer rate and data reliability specifications this chapter require the media to conform to
the AIT-E Turbo, AIT-1 Turbo and AIT-1 Media Specification and also require the drive and media to remain within
their respective operating and non-operating environmental specifications. The specifications below also assume
that the C3 ECC frame is generated on writing and used as necessary on reading, and further assumes that
read-after-write rewrites are used as necessary on writing.
2-6
10
Figure 2-4: Mounting Attitude and Tolerance
10
SONY AIT-1 Turbo drive SDX-470V series Ver.1.0
10 10
10
10
Advertisement
Table of Contents
