Avoiding Crossing Remote Control Signals When Using Multiple Yamaha Receivers; Resetting The Sirius Satellite Radio™ Parental Lock Code; Changing Tv Format - Yamaha RX-A2000 Owner's Manual

SOURCE RECEIVER
l
Avoiding crossing remote control
signals when using multiple
AV
Yamaha receivers
1 2 3 4
5 6 7 V-AUX
AUDIO
1 2 3 4
PHONO MULTI USB NET R E M O T E C O N A M P
DOCK TUNER SIRIUS [ A ]
The remote control of the unit can only receive signals
from a receiver which has an identical ID (remote
control ID). When using multiple Yamaha AV receivers,
you can set each remote control with a unique remote
control ID for its corresponding receiver.
On the contrary, if you are setting the same remote
control ID for all receivers, you can use one remote
i
ENTER
control to operate 2 receivers.
ID1 (Default)
CATEGORY
ID2
1 2 3
TUN./CH
4 5 6
v
7 8 9
ID1 is set for both remote control and receiver by
0
default. To avoid crossing remote control, change the
B
SETUP
remote control ID for both remote control and
receiver.
■ To change the remote control ID
I D 1
1
2
3
4
Receives the remote control signals set in
ID1.
Receives the remote control signals set in
ID2.
5
6
Extended functionality that can be configured as needed (Advanced Setup menu)
Perform each of the following steps within 30
seconds. Settings will be automatically stopped if
more than 30 seconds passes since the last
operation. To reset, repeat from step 1.
Press BSETUP.
iCursor B / C
Press repeatedly to select
"PRESET" and press iENTER.
lRECEIVER A
Press and press
iENTER.
Enter the desired remote control ID code.
To switch to ID1:
v
Enter "5019" using Numeric keys or
i Cursor B / C / D / E.
To switch to ID2:
v
Enter "5020" using Numeric keys or
i Cursor B / C / D / E.
iENTER
Press to set the number.
"OK" appears in the display window if setting was
successful.
"NG" appears in the display window if the setting
was unsuccessful. In this case, start over from step
4.
BSETUP
Press again to exit from the
setup menu.
Returns to ID1 after the remote control code is
initialized (☞p. 136).
SETUP
Resetting the SIRIUS Satellite
Radio™ parental lock code
S I R I U S P I N
C A N C E L
Reset the SIRIUS Satellite Radio parental lock code to
the factory default setting. If you forget the code, it can
be reset.
RESET
Resets the code to the factory default
setting.
CANCEL (Default)
Cancels resetting of the parental lock
code.

Changing TV format

T V F O R M A T
N T S C
Change the color encoding format of OSD to PAL or
NTSC (default), to match the format used by the TV
connected via the HDMI OUT 1-2 or VIDEO
(MONITOR OUT) jack.
En
140