P.back (Audio Playback) From Main (Vfo-A) Receiver - Yaesu FTDX-9000MP Operation Manual

Yaesu ftdx-9000mp hf transceiver: operation manual
Hide thumbs Also See for FTDX-9000MP:
Table of Contents

Advertisement

C
ONVENIENT
P.BACK A
Once engaged by the operator, the FT
receiver audio on the Main (VFO-A) band. this capability is especially useful for confirming a callsign that may have been
difficult to copy due to noise or QRM, etc.
Recording
Press and hold in the P.BACK key (#
for two seconds to initiate recording; an LED
imbedded in the switch will light up to con-
firm that recording is in progress. The recorder will store
up to 30 seconds of the Main (VFO-A) band received au-
dio, and will retain the most-recent 30 seconds of audio
on a running basis.
Pressing the P.BACK switch once more will halt the re-
cording, and the LED imbedded in the switch will go out.
Note
When the transceiver is turned off, the contents of the re-
cording memory are erased!
Playback
Press the P.BACK key momentarily, after recording has
been halted, to begin playback of the recorded audio. The
last 30 seconds of audio will be heard in the speaker or
headphones. If you do not intervene, the entire 30 seconds
will be played back, after which the playback will stop
automatically. To halt playback at any time, just press the
P.BACK key momentarily again. The next time you press
the P.BACK key, it will pick up the playback where you
left off.
The P/B key of the supplied FH-2 Keypad can also serve as a remote-control recording/playback switch. Operation
is described below.
Recording
Press and hold in the FH-2's P/B key for two seconds to initiate recording.
The front panel P.BACK switch's LED will light up to confirm that re-
cording is in progress.
Press the FH-2's P/B key momentarily to halt recording; the front panel's
LED will go out.
You may also press the front panel's P.BACK key (momentarily) to halt
recording, as well.
When the transceiver is turned off, the contents of the recording memory are
erased.
Playback
Press the FH-2's P/B key momentarily, after recording has been halted, to
begin playback of the recorded audio. The last 30 seconds of audio will be
heard in the speaker or headphones. If you do not intervene, the entire 30
seconds will be played back, after which the playback will stop automati-
cally. To halt playback at any time, just press the P/B key momentarily
again. The next time you press the P.BACK key, it will pick up the play-
back where you left off. You may also press the front panel's P.BACK key
(momentarily) to play back the recorded audio, as well.
Page 54
F
EATURES
P
UDIO
LAYBACK FROM
9000MP begins the automatic recording of the last 30 seconds of incoming
)
M
VFO-A R
AIN
Stop
Start
30 Seconds
FT 9000MP O
ECEIVER
P.BACK key
LOCK
ON
OFF
M

Advertisement

Table of Contents
loading

Table of Contents