Visioneer OneTouch 9520 User Manual page 22

4. Plug the power adaptor into the scanner power port, then into a
wall outlet.
Note: Your scanner does not have a power switch. Plugging it in turns
on the power.
Note: Only use the power adaptor (Model No. PA-08J made by YHI,
Ltd.) included with your scanner. Connecting any other type of power
supply may damage your scanner, and will void its warranty.
The status light on the front of the scanner is illuminated,
indicating the scanner is receiving power.
S 3: C S
TEP ONNECT THE CANNER
Status light
15