Easy Menu; Uto Keystone; Viewsonic - ViewSonic PJL9371 User Manual

EASY MENU

From the EASY MENU, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons. Then
perform it according to the following table.
Item
ASPECT
AUTO KEYSTONE
(EXECUTE)
KEYSTONE
PICTURE MODE
(continued on next page)

ViewSonic

Using the ◄/► cursor buttons switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu.
Using the ► cursor (or the ENTER) button executes the auto
keystone function.
See the AUTO KEYSTONE (EXECUTE) item in the SETUP menu.
Using the ◄/► cursor buttons corrects the vertical keystone
distortion.
See the KEYSTONE item in the SETUP menu.
Using the ◄/► cursor buttons switches the picture mode.
The picture modes are combinations of the GAMMA and the
COLOR TEMP settings. Choose a suitable mode according to the
projected source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DAYLIGHTó WHITEBOARD ó BOARD(GREEN)
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYLIGHT
• When the combination of the GAMMA and the COLOR TEMP
differs from pre-assigned modes above, the display on the menu
for the PICTURE MODE is "CUSTOM". Please refer to the GAMMA
and the COLOR TEMP items in the PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
Description
GAMMA
1 DEFAULT
2 DEFAULT
3 DEFAULT
4 DEFAULT
4 DEFAULT
5 DEFAULT
6 DEFAULT
4
EASY MENU
COLOR TEMP
2 MID
3 LOW
1 HIGH
4 Hi-BRIGHT-1
5 Hi-BRIGHT-2
2 MID
6 Hi-BRIGHT-3
PJL9371