Advertisement
To display the Main Menu, press the NAVI button on the Front Control
Panel shown on the previous page.
All OnView menus and adjustment screens disappear automatically
NOTE:
after about 15 seconds. You can adjust the length of time on the OSD Time Out
function in the Setup Menu.
Rotate the NAVI button to highlight a control you want to adjust. Press the
NAVI button.
To adjust the selected control, rotate the NAVI button .
To save the adjustments and exit the menu, select Exit and press the NAVI
button.
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60Hz to the VP180m. (Look for instructions on "changing the
refresh rate" in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible. (The black border around the
edge of the screen should barely touch the illuminated "active area" of the
ViewPanel .)
• Adjust Fine Tune so that the screen image looks focused, crisp, and sharp.
ViewSonic
VP180m
9
Advertisement
