Biostar A780L3L Bios Setup Manual page 33

A780L3L BIOS Manual
NB VID
This function allows you to adjust the voltage of NB chip.
NB FID
This item allows you to select the Frequency of NB chip.
Options: 800MHz ~ 7000MHz (Differed by CPU)
NB DID
This is the NB Divider.
Options: Divided by 1 (Default) / Divided by 2
HT Link Speed
The HyperTransport link will run at this speed if it is slower than or equal to the
system clock and the board is capable.
Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz
HT Link Width
The HyperTransport link will run at this width.
Options: Auto (Default) / 8 Bit / 16 Bit
Advanced Clock Calibration
Advanced Clock Calibration (ACC) is an enhanced technology for overclocking,
needing support from both chipset and CPU. When enabled, it will improve the
stability of advanced overclocking greatly.
Options: Disabled (Default) / Auto / All Cores / Per Core
Core Leveling
This item allows you to activate Core Leveling function.
Options: Auto(Default) / Auto
32