Deleting A Vpn Tunnel; How To Set Up Vpn Tunnels In Special Circumstances - NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

Note: When NETBIOS is enabled (which it is in the VPNC defaults implemented by
the VPN Wizard), automatic traffic will reactivate the tunnel. To prevent reactivation
from happening, either disable NETBIOS or disable the policy for the tunnel (see
"Using the Policy Table on the VPN Policies Page to Deactivate a VPN Tunnel" on page
8-32).

Deleting a VPN Tunnel

To delete a VPN tunnel:
Log in to the Router.
1.
Open the DG834G management interface and click VPN Policies to display the VPN Policies
2.
screen (Figure 8-40). Select the radio button for the VPN tunnel to be deleted and click the
Delete button.
Figure 8-40: VPN Policies

How to Set Up VPN Tunnels in Special Circumstances

When the VPN Wizard and its VPNC defaults (see
circumstances, use one of the following alternatives:
• Auto Policy—for a typical automated Internet Key Exchange (IKE) setup, see
Policy to Configure VPN Tunnels" on page
the authentication scheme and automatically generate the encryption keys.
Virtual Private Networking (Advanced Feature)
Reference Manual for the Model Wireless ADSL Firewall Router DG834G
202-10006-05, June 2005
Table 8-2) are not appropriate for your special
8-36. Auto Policy uses the IKE protocol to define
"Using Auto
8-35