Setting The Backlight - Kyocera QCP-2760 - Qualcomm Cell Phone Quick Start Manual

SILENCED," then "INCOMING
CALL."
Press or
2.
SEND
call after silencing the ringer.
To adjust the ringer volume
In standby mode, press the volume
keys to adjust the ringer volume.
To set up the ringer type
Press or
1.
Choose Sounds > Ringer Type.
2.
On QCP 860 and QCP 1960 Thin
Phones, press 2 6; on QCP 2760 Thin
Phones, press 2 7.
Press or
3.
cycle through the settings. Each ring
plays automatically.
Press or
4.
select the setting you want.
Quick Start Guide for QCP 860, QCP 1960, and QCP 2760 Thin Phones
to answer the
TALK
under [MENU].
under [NEXT] to
under [OK] to

Setting the backlight

To save battery power, do not set the
backlight to always on.
Press or
1.
Press 6 1 to select Backlight.
2.
Press to cycle through the
3.
options: always on, always off, 10
seconds, 30 seconds, 10 sec + call, or
30 sec + call. (The "+ call" options
cause the light to remain on for the
duration of the call.) A check mark
shows which option is selected.
Press or
the option you want.
under [MENU].
under [OK] to select
3