Checking The Focus - Canon PowerShot A3000 IS User Manual

Checking the Focus

You can magnify the area of a recorded image that was inside the AF
Frame, or the area of a face that was detected, to check the focus.
Press the l button, and
1
switch to the focus check display
(p. 44).
●
For images with detected faces, you can
also switch to the focus check display by
pressing the 0 button.
A white frame will appear where the AF
frame or face was when the focus was set.
A gray frame will appear on a face detected
during playback.
The area within the orange frame appears
magnified.
Switch frames.
2
Press the zoom button toward k once.
●
The screen shown to the left will appear.
Press the 0 button to switch between
●
frames on detected faces. Press the m
button to move to another frame.
Change the magnification level or
3
location.
●
Press the zoom button to change the display
size, and the opqr buttons to change the
display position while checking the focus.
Pressing the n button resets the
●
display to Step 1.
95