YORKVILLE ELITE E10P Brochure

Features:
350 Watt Powered Speaker
·
· 10-inch Neodymium Woofer / 1-inch Driver
Solid Plywood Cabinet Construction
·
Internally Biamped
·
65 - 20k Frequency Response (Hz +/- 3db)
·
Metal Handle & Standmount Adaptor
·
Crossover Frequency 1500 Hz
·
Overview:
The E10P is an advanced, compact two-way active loudspeaker designed for a wide variety
of pro-audio applications. Innovative processing is built-in to ensure optimum performance
and clarity.
Built for maximum versatility, the E10P input section will easily handle microphone or line level
inputs through the XLR / TRS Combi-jack. Bass and Treble EQ in addition to Level control and
a Mic/Line input gain selector ensure the E10P can handle virtually any audio source. A
Live/Playback EQ preset selector, a 100Hz/50Hz low-frequency Roll-off selector (no crossover
needed for subs), a full-time Limiter with LED indicator, a Clip LED, a Link output ensure the
E10P can adapt easily to any audio application including use as a front-of-house PA
loudspeaker, as a personal wedge monitor or as a single unit micro PA for a paging and
playback system (no additional mixer required).
A lightweight, low-noise 300-Watt Class-D amplifier drives the low frequency 10-inch
woofer while a two-tier 50-Watt amplifier capable of delivering an exceptionally clear and
linear high-frequency response powers the 1-inch horn. An on-board active DSP based
crossover ensures that the woofer and horn operate optimally while protecting the high
quality speaker components.
The E10P features a powerful yet lightweight 10-inch low-frequency driver with a neodymium
magnet, a silky-smooth 1-inch horn and an enclosure built from void-less 25mm multi-ply wood
for lightweight with classic Elite ruggedness. That durability is engineered into the multi-angle
enclosure pioneered for the Elite line that enables the E10P to operate vertically on a stand or
horizontally as a stage monitor. For added convenience, the E10P easily converts between
120VAC, 230VAC or 240VAC.
y o r k v i l l e . c o m
E10P
L10P
élite
élite
10-inch Powered Speaker
E10P Specifications:
Model
SYSTEM TYPE
ACTIVE OR PASSIVE
PROGRAM POWER (WATTS)
BIAMPABLE
FREQUENCY RESPONSE (HZ +/- 3DB)
CROSSOVER FREQUENCY (HZ)
DRIVER CONFIGURATION
HF PROGRAM POWER (WATTS)
HF IMPEDANCE (OHMS)
HF DISPERSION (°H X °V)
HF PROTECTION
LF PROGRAM POWER(WATTS)
LF IMPEDANCE(OHMS)
LF PROTECTION
TOTAL POWER (WATTS)
COOLING SCHEME
POWER CABLE
POWER SWITCH
POWER CONSUMPTION (TYP/MAX)
INPUTS
INPUT IMPEDANCE (BAL/UNBAL)
INPUT SENSITIVITY (VRMS SINE)
LEVEL CONTROLS
EQ CONTROLS
LIMITER
LED INDICATORS
CORNERS
FEET
FLYING HARDWARE
BAR HANDLES
POLE MOUNT ADAPTER (1 3/8"-3.5CM)
ENCLOSURE MATERIALS
PORT(S)
GRILLE
COVERING / FINISH
OPTIONAL COVERING / FINISHES
DIMENSIONS (DWH XBACKW, INCHES)
DIMENSIONS (DWH XBACKW, CM)
WEIGHT (LBS/KG)
E10P
Powered Loudspeaker
Active
350
Internally Biamped
65 - 20k
1500
10-inch / 1-inch
50
8
100 x 25
Peak and Average Limiting
300
4
Excursion, RMS
350
Convection
Removable IEC
Yes
120VA / 200VA
1 Combijack (XLR / 1/4-inch)
4k ohms / 2k ohms
Line in 1.4 at center, 0.35 at max
Gain
Bass, Treble
Peak and Average limiting on horn and woofer
Power, Clip
Metal
Plastic Glides
5 (2 Top, 2 Bottom, 1 Pullback)
One Side
Yes
15mm (5/8-inch) 11-ply Russian Birch
Rear
Perforated Metal
Black Ozite (Carpet)
Black Ultrathane Paint (E10PB)
12 x 13 x 18.5 x 5.5
30 x 33 x 45 x 14
34 / 15.5
Specifications subject to change without notice.