Stage 3 Fitting Your Child In The Prince; Everyday Use Of The Harness - Britax PRINCE Manual

Prince_Page_9.pdf
Stage 3 - Fitting your child in the PRINCE
Have you checked the position of the 'seat-belt' buckle? If not see 'Correct
buckle position' on page 8.

Everyday use of the harness

1
Loosen the harness by pushing the adjuster button in
as you pull the shoulder straps forward as much as
possible.
C
3
M
Y
CM
MY
CY
Check that the harness is not twisted and pull the
harness up to tighten the lap sections which are
designed to fit low down on your child's body.
5
Finally, pull both chest pads down from your childs'
shoulders onto their chest.
12/09/2008 15:15:29
2
(a)
(b)
Unfasten the buckle by pressing the red button
place your child in the seat. Fit the harness around your
child and fasten the buckle up
4
Pull the adjuster strap forward making sure the harness
is a comfortable but FIRM fit around your child.
REMEMBER -
The chest pads are an important
safety feature. Never use the
PRINCE without them.
Click!
(a) and
(b).
page 9