Know Your Breville Wizz™ Mix Digital Hand Mixer; Before First Use - Breville BHM500 Instructions Manual

Know your Breville Wizz™ Mix Digital Hand Mixer
Speed down
button - 16
speeds for
greater mixing
control
LCD Screen - shows
speed and count-up
timer display
Beater sockets
Stainless steel beaters
Stainless steel dough hooks
(not shown)
6
Eject button - easy and quick release
On/Off Switch
Speed up button - 16 speeds for
greater mixing control
Turbo speed - for greater mixing
control
Powerful 00 watt motor
Operating your Breville Wizz™ Mix Digital Hand Mixer

Before first use

Remove and safely discard any packaging
material and promotional stickers before
using the appliance for the fist time. Wash the
beaters and dough hooks in warm soapy water
with a soft cloth. Rinse and dry thoroughly. The
beaters and dough hooks may be washed in a
dishwasher. Wipe the motor body with a damp
cloth then wipe dry thoroughly.
When first using your hand mixer, you may
notice an odour coming from the motor. This is
normal and will dissipate with time.
Using The Hand Mixer
Step 1
Ensure the Hand Mixer is switched off at the
power outlet the power cord is unplugged from
the power outlet and the On/Off switch is in the
'OFF' position.
Step 2
Insert each shaft (mixing beater or dough hook)
into the left and right sockets underneath the
Hand Mixer body (see below).
Step 3
Insert the beaters or dough hooks by pushing
the shaft of the socket, turning slightly if
required until they lock into place.
Step 4
Select a mixing bowl large enough to
accommodate the beaters, as a bowl that is too
small will damage the beaters. Add ingredients
to the mixing bowl as shown in a recipe.
Step 5
Plug the power cord into a 0/40V power
outlet and turn the On/Off switch to the 'ON'
position.
Step 6
Place the beaters or dough hooks into the
ingredients inside the mixing bowl. To
commence mixing, push the 'Speed Up' button
until you have reached the required speed.
If you wish to make the speed slower at any
time, push the 'Speed Down' button.
The speed used will show on the LCD screen,
also the mixing time that has lapsed.
Always begin mixing on a lower speed setting
to prevent splattering, increasing to the desired
speed for the mixing task.
7