Table of Contents
Advertisement
Wake-On-LAN
The Wake-On-LAN header is desig-
nated JWOL. See the table on the
right for pin definitions.
have a LAN card with a Wake-On-LAN
connector and cable to use the Wake-
On-LAN feature.
Wake-On-Ring
The Wake-On-Ring header is desig-
nated JWOR. This function allows your
computer to receive and "wake-up" by
an incoming call to the modem when
in suspend state. See the table on the
right for pin defi nitions. You must have
a Wake-On-Ring card and cable to use
this feature.
System Management Bus
Power Header (PS_SMBUS)
The header designated PS_SMBUS
may be used to monitor the power sup-
ply for system management. See the
table on the right for pin defi nitions.
3rd Power Supply Alarm
Reset Header
Connect a cable from your power sup-
ply to JAR to provide you with warning
of a power supply failure. The warning
signal is passed through the PWR_LED
pin to indicate a power failure. See the
table on the right for pin defi nitions.
Chapter 5: Advanced Serverboard Setup
You must
Note: This feature is only available when using
redundant power supplies.
5-17
Wake-On-LAN
Pin Defi nitions
(JWOL)
Pin#
Defi nition
1
+5V Standby
2
Ground
3
Wake-up
Wake-On-Ring
Pin Defi nitions
(JWOR)
Pin#
Defi nition
1
Ground (Black)
2
Wake-up
System Management Bus
Power Header
Pin Defi nitions (PS_SMBUS)
Pin#
Defi nition
1
Clock
2
Data
3
PWR Fail
4
Gnd
5
+3.3V
3rd Power Supply
Alarm Reset Header
Pin Defi nitions (JAR)
Pin#
Defi nition
1
P/S 1 Fail Signal
2
P/S 2 Fail Signal
3
P/S 3 Fail Signal
4
Reset (from MB)
Advertisement
Table of Contents
