Supero AS-4021M-82R Plus User Manual page 26

1
AS402 M-T2R+/4021M-82R+ User's Manual
4. Check the SCSI/SATA disk drives
Depending upon your system's confi guration, your system may have one or
more drives already installed. If you need to install SCSI or SATA drives, please
refer to Chapter 6.
5. Check the airfl ow
Airfl ow is provided by three hot-swap 8-cm chassis fans working in conjunction
with an air shroud. Two 8-cm exhaust fans are also mounted at the rear of the
chassis. The system component layout was carefully designed to promote suf-
fi cient airfl ow through the chassis. Also note that all power and data cables have
been routed in such a way that they do not block the airfl ow generated by the
fans. Keep this in mind when you reroute them after working on the system.
6. Supplying power to the system
The last thing you must do is to provide input power to the system. Plug the
power cords from the power supply modules into a high-quality power strip that
offers protection from electrical noise and power surges. It is recommended that
you use an uninterruptible power supply (UPS). Finally, depress the power on
button on the front of the chassis.
2-10